New ArkNEW ARKACOUSTIC DETECTION

BUYER KNOWLEDGE / NEW ARK

Technology & Project Fit

Compare acoustic sensing, RF, radar, and EO/IR roles and evaluate their suitability for your low-altitude security project.

10 questions found · of 10

11—20

Technology & Project Fit

11

Why choose acoustic detection instead of radar or RF?

Acoustic sensing listens for existing motor, rotor and airframe sound rather than transmitting sensing RF. It can therefore contribute observations when a drone has no observable radio-control link, and it does not need visible illumination. Its usefulness still depends on the sound reaching the array above the site's background noise.

The choice is usually about complementary evidence, not replacing every other sensor. Radar, authorised RF reception and EO/IR can corroborate acoustic observations. Compare the combined approach against your targets, industrial noise, obstructions and required outputs through site-specific validation.

12

Can acoustic detection find drones that fly without radio control?

Potentially, yes: motor, rotor and airframe sound may remain observable even when a drone has no radio-control link. Acoustic sensing uses that sound rather than relying on control transmissions. Detection still requires a usable acoustic signal under the actual noise, propagation and obstruction conditions.

Sound alone cannot establish that a drone uses a fibre-optic link, nor does this principle guarantee detection of every autonomous or non-radio-controlled aircraft. Validate the relevant target and flight conditions, and use radar or EO/IR corroboration where appropriate to strengthen the assessment.

13

Does it work at night, in fog, rain or snow?

Acoustic sensing does not require visible illumination, so darkness is not the same limitation it can be for a visible-light camera. That does not establish all-weather performance: wind, precipitation, propagation and obstruction can change the quality of the sound available to an array.

For fog, rain or snow, assess both detection performance and the selected hardware's environmental suitability. Request configuration-specific operating limits and validate representative site conditions. If EO/IR is included, evaluate that channel separately rather than assuming every sensor retains the same performance in difficult weather.

14

How does acoustic detection cope with compressors, flare stacks and plant noise?

Compressors, flare activity and other plant noise can mask or complicate drone sound. New Ark's approach includes AI-assisted acoustic assessment, but that is not a guarantee that every industrial sound will be rejected or every drone separated from it. The site's normal and changing background activity matters.

Begin with a noise survey covering relevant operating conditions and possible array locations. During validation, label both drone observations and plant activity, measure false alarms over a defined period, and assess detection separately. Multi-sensor corroboration can help evaluate ambiguous acoustic observations.

15

What false alarm rate should we expect?

There is no verified universal false-alarm rate to apply to your site. A meaningful rate needs a defined observation period, operating conditions and a clear definition of a false alarm. Continuous plant activity, intermittent machinery and other sound sources should be represented in the evaluation.

Agree how alerts will be logged and checked against labelled ground truth, including periods without target drones. Report false alarms alongside detection probability and relevant conditions; simply reducing alerts is not evidence of better performance if genuine targets are also missed.

16

Can you detect and track a swarm?

Multi-object detection and persistent tracking are different requirements. New Ark's About page includes concurrent-object references for initial project discussion, but these are not guaranteed swarm performance or track-continuity results. Several simultaneous sound sources must be assessed for the selected configuration and the site's acoustic conditions.

Define the number and types of targets, their separation and the outputs you need. An authorised validation should measure detection, source separation and track continuity independently, with labelled observations. Radar or EO/IR corroboration can be included, without treating sensor information as authorisation for a response.

17

What range can you actually achieve against a DJI-class drone?

A DJI-specific detection range is not established here. The published multi-rotor range context is for initial project discussion, not a guaranteed result for a particular DJI model. Rotor sound, flight condition, industrial noise, wind, propagation and obstructions all affect the usable acoustic signal.

Specify the exact aircraft and configuration, the distances to evaluate, and whether success means an initial detection, classification or continuous track. Request an authorised field validation with labelled observations under representative conditions. A range figure without those conditions and endpoints is not a reliable procurement specification.

18

How precise is the location you report?

An acoustic array measures directional information; a bearing is not automatically a complete position or altitude estimate. Networked arrays may support angle-of-arrival bearing intersection when surveyed geometry and suitable observations are available. No universal localisation accuracy is established for a proposed installation.

Ask which outputs the selected configuration actually provides and how their uncertainty is represented. Validate position error separately from detection and tracking, using labelled target locations, agreed distance and environmental conditions, and defined measurement endpoints. Do not treat an azimuth specification as proof of three-dimensional location accuracy.

19

How much warning time do we get before a drone reaches the asset?

Warning time depends on where a usable detection first occurs, the aircraft's movement and the time required to deliver an alert. A catalogue range does not establish a guaranteed warning interval, especially where noise or obstructions delay the first reliable observation.

Define the protected asset boundary and measure the interval between an agreed alert endpoint and the target reaching that boundary during authorised validation. Assess detection and notification delays separately, and confirm how operators receive and interpret the alert. Detection information alone does not authorise an active countermeasure.

20

Does the system emit anything that could interfere with our radios or instrumentation?

Passive acoustic sensing measures existing sound rather than transmitting sensing RF. That describes the sensing principle, not an assurance that the complete installation has no electromagnetic emissions. Powered electronics and any networking equipment still require electromagnetic-compatibility and site review.

Assess the exact array, processing and communications configuration against your radios and instrumentation. Request the applicable conformity documents and have the responsible site specialists review installation compatibility. Passive sensing should not be interpreted as explosion-proof construction, exemption from every licence or a blanket guarantee of interference-free operation.

NEW ARK / PROJECT CONSULTATION

Have a question about your site?

Share your application, target types, existing sensors and procurement requirements. We can use those details to scope the next project discussion.

Discuss your project