New Ark Acoustic Detection logoNEW ARKACOUSTIC DETECTION

ACOUSTIC DETECTION · BUYER & TECHNICAL GUIDES / 599

02 / 3THREE DISTINCT QUESTIONS · ONE ACOUSTIC TOPIC

Acoustic drone localization system manufacturer: Asking for a Coordinate Dictionary, Not Just Coordinates

When an acoustic drone localization system manufacturer sends position-looking fields, the numbers are not useful until their meaning is documented. A GIS integration engineer needs a coordinate dictionary that names the reference frame, axis order, units, height datum, validity rules and local-versus-geographic status. This is an interface definition question, not a request for deployment geometry.

Discuss PCBA deliveryContact New Ark
WRITTEN FOR599GIS integration engineer reviewing a manufacturer localization interface

KEY TAKEAWAY

Acoustic drone localization system manufacturer outputs need a coordinate dictionary

Treat every localization value as a typed field, not as an interchangeable pair of numbers. Ask for the coordinate reference system, axis names and order, units, altitude reference, precision and uncertainty semantics, validity states, and examples that use neutral placeholders. If the output is local or engineering-frame data, the interface should say so instead of labeling it latitude and longitude.

NEW ARKCoordinates are values plus a reference frame.A documented interface prevents a plausible number from being plotted in the wrong place.

01

Acoustic drone localization system manufacturer: Start with the reference frame, not the field names

GIS integration engineer reviewing a manufacturer localization interface

A field named x, y or position does not identify a location by itself.

The dictionary should identify the coordinate reference system (CRS) or clearly state that the values belong to an engineering or sensor-local frame. A CRS supplies the reference used to interpret coordinates relative to the Earth or to another defined origin. Without it, a GIS application cannot know whether a pair represents geographic angles, projected distances, or arbitrary local values.

Ask the manufacturer to provide a stable CRS identifier where one exists, together with its human-readable name and the scope of the transformation. An EPSG identifier, an OGC definition, or an agreed project-specific name can be useful, but the identifier must describe the actual output. Do not infer a CRS from the magnitude or number of decimal places in the values. A value that looks like longitude can still be a local x coordinate.

The dictionary should also say whether the frame is fixed to the Earth, tied to a site reference, or attached to a sensor or platform. If the origin or orientation can change after configuration, that change is part of the interface contract. The question is not where to place equipment. It is which reference a received value belongs to and when that reference is valid.

Name the datum and transformation responsibility

A geographic or projected CRS can depend on a datum and on transformation parameters. The integration record should identify whether conversion to the customer's GIS CRS is performed by the manufacturer, by an adapter, or by the customer's application. It should also state which version of a definition or transformation is assumed when reproducibility matters.

A concise requirement might say: outputFrame is a named local frame; conversion to the customer's map CRS is outside the sensor message and must be performed by the integration layer. That statement is safer than silently converting values and presenting a false level of geographic certainty.

Separate position from direction and quality

A bearing, direction-of-arrival estimate, range-like value and position estimate are different output types. A map can draw a directional cue without receiving a geographic position. The dictionary should name these separately and state which are optional, derived, unavailable or conditional on a selected configuration.

Likewise, a confidence label is not automatically a measured accuracy. If an uncertainty field exists, define its units, shape and statistical meaning. If it does not, the interface should not imply that a plotted point has a known error radius.

02

Make axis order and units impossible to guess

GIS integration engineer reviewing a manufacturer localization interface

Many integration failures come from a valid-looking value being read in the wrong order or unit.

The dictionary should list each axis by semantic name, order, direction and unit. Do not rely on labels such as coordinate1 and coordinate2, or on a convention that every library will interpret identically. Explicitly state whether the sequence is longitude then latitude, latitude then longitude, easting then northing, or another order defined by the chosen CRS.

Units belong beside the axis definition. Geographic coordinates may be decimal degrees, while projected or local axes are commonly expressed as a linear unit. A number without a unit is incomplete even when its size seems familiar. Also document sign conventions, allowed nulls, and whether a field is an angle, distance, height or dimensionless quality value.

If the transport format uses an array, include a named schema or object representation in the documentation. An object such as {x, y, z} is not enough unless x, y and z are tied to the frame and units. If a compact array is required, publish its ordered meaning and keep the order stable across versions.

Do not let a library default define the contract

GIS and mapping libraries may expose different defaults or convenience conventions. The integration should validate the manufacturer's declared order before transforming or displaying data. A parser that accepts an array is not evidence that the array was interpreted correctly.

For quality assurance, create fixtures that deliberately distinguish the axes without using a real place. For example, use symbolic test values such as AXIS_A_VALUE and AXIS_B_VALUE in a schema example, then assert which field receives each value. The fixture checks the contract without becoming a map or a deployment instruction.

Document precision without overstating accuracy

Decimal places describe representation precision, not necessarily localization accuracy. The dictionary can specify numeric type, permitted range and serialization precision while keeping uncertainty as a separate field. If rounding, truncation or smoothing occurs, identify where it occurs and whether the displayed value differs from the transmitted value.

This distinction matters when a GIS system stores or redraws an observation. A long decimal string should not be treated as proof of a correspondingly precise physical estimate.

03

Give altitude its own reference definition

GIS integration engineer reviewing a manufacturer localization interface

A horizontal CRS does not, by itself, explain the meaning of a third coordinate.

If the interface supplies altitude or height, ask what the value is measured from. Possibilities include an ellipsoid, a gravity-related vertical datum, a specified local origin, or an internal relative reference. The dictionary should name the vertical reference, positive direction, unit and null behavior. ‘Altitude’ alone is too broad for a reliable GIS transformation.

Horizontal and vertical references may form a compound CRS, but they still need to be described separately. Confirm whether the third value is height, depth, a relative level, or another quantity. If the system does not provide height, say that explicitly rather than populating a zero that could be mistaken for ground or sea level.

The interface should also describe whether height is measured, estimated, inherited, or unavailable for a particular event. A three-dimensional display can be useful for review, but the display must not turn an unspecified third field into a claimed three-dimensional localization capability.

Avoid the zero-as-ground shortcut

A missing altitude and a true zero height are different states. Use a documented null or status code when the value is not supplied. If the format requires a numeric placeholder, define it outside the valid numeric range and explain the rule, while preferring an explicit validity field.

The same rule applies to a position that has horizontal values but no valid vertical value. The application should be able to render a two-dimensional observation without inventing a vertical fact.

Keep vertical conversion in scope

If the customer GIS uses a different vertical reference, identify who supplies the conversion and which input metadata it requires. Do not bury that work in a generic ‘coordinate conversion supported’ statement. A useful project handoff names the horizontal conversion, the vertical conversion and any data-quality caveat as separate items.

04

Do not label local coordinates as geographic positions

GIS integration engineer reviewing a manufacturer localization interface

A local frame can be valuable, but it must remain visibly local in the API and user interface.

Manufacturers may supply values relative to a sensor, an installation reference or a project-defined origin. Such data can support an integrator's internal review without being a latitude/longitude position. Labeling local x and y as geographic coordinates can place an observation in an entirely wrong region while producing no parser error.

The dictionary should state the origin, orientation, positive directions, dimensionality and lifecycle of a local frame at a level appropriate to the integration. It should also say whether the frame is static, configured, recalibrated, or unavailable until a separate reference is established. These are interface facts, not instructions for arranging an installation.

If conversion to a geographic CRS is offered, request the input assumptions, output CRS and status when the conversion cannot be performed. If conversion is not offered, make the boundary clear: the application receives local information and must not advertise it as a map position.

Use a type that carries the distinction

A message can include frameType with values such as geographic, projected or local, plus frameId and coordinate metadata. The exact names are a project choice, but the semantic distinction should be machine-readable. A free-text note hidden in a PDF is a weak substitute for a field that the application can validate.

When a customer needs both a local estimate and a converted map estimate, represent them as separate objects with separate validity and provenance. Do not overwrite one with the other or imply that a conversion was performed when it was not.

Treat configuration changes as data changes

If the local origin, orientation or frame identifier changes, downstream records need a way to recognize the change. Include a configuration revision or frame version with the message, or define how the application retrieves that version. Otherwise, historical values may appear comparable even though they use different references.

05

Specify unknown, stale and invalid positions

GIS integration engineer reviewing a manufacturer localization interface

A position field needs a validity model so the application can distinguish no result from a real result.

Ask for explicit states such as valid, unavailable, unknown, stale, rejected or outside the supported domain, using the manufacturer's actual vocabulary. A zero value, an empty array and a missing field should not acquire different meanings by accident. The message should say whether the status applies to the complete position, one axis, the height, or the associated quality fields.

Time metadata is part of interpretation. Separate the time an acoustic observation was made from the time the application received the message when both exist. If a value can remain in a cache after the source becomes unavailable, the interface should identify its age or freshness state. This prevents a last-known value from being displayed as a current localization.

Validation rules should cover range checks, frame identifiers, unit declarations and version compatibility. A consumer should be able to reject an ambiguous message rather than silently plotting it. Logging the reason for rejection is useful for integration support, but it should not be confused with evidence that the underlying localization was physically accurate.

Define nulls and errors separately

Null can mean ‘not supplied,’ while an error can mean ‘attempted but failed.’ An unknown classification or unavailable coordinate should not be collapsed into a valid coordinate with low confidence. The dictionary should specify whether a quality field is meaningful when the position is invalid and how consumers should handle each combination.

For example, a message may carry status=unavailable, position=null and an explanatory reason code. That is more interoperable than a numeric sentinel whose meaning must be memorized by each integration team.

Version the meaning, not only the syntax

A software revision can preserve the same JSON field names while changing a frame definition, unit, default or status meaning. Include an interface version and publish change notes that call out semantic changes. A parser that continues to run is not proof that the values remain comparable.

06

Request examples that explain fields without exposing geometry

GIS integration engineer reviewing a manufacturer localization interface

A good example teaches the contract while avoiding accidental claims about a real site or performance.

Ask for complete, de-identified messages covering a valid observation, an unavailable position, a local-frame value and a version or configuration change. Each example should include field descriptions, allowed values, units, frame identifiers, timestamps and status semantics. Symbolic placeholders or clearly synthetic values are preferable to real coordinates when the goal is interface review.

Examples should show whether a position is represented as an object or ordered array, where the CRS is declared, and how optional altitude is handled. They should also show what a consumer receives when only a direction is available. The goal is to make field meaning testable, not to demonstrate a coverage area or a deployment geometry.

New Ark's public PCBA delivery material describes array acquisition, algorithm processing and system interfaces as project-specific integration subjects. That is a useful boundary for a buyer conversation: request the coordinate dictionary as part of the agreed interface package, alongside the relevant software revision and data-quality definitions. Do not treat a public product page as a substitute for the manufacturer-specific schema.

A neutral message pattern

A safe documentation pattern might show: eventId=EXAMPLE-001; frameType=local; frameId=FRAME-EXAMPLE; coordinates={axis1:VALUE_A, axis2:VALUE_B}; height={value:null, status:unavailable}; positionStatus=valid; interfaceVersion=EXAMPLE-VERSION. The example deliberately uses placeholders instead of a site coordinate or array geometry.

The accompanying prose should explain which axis is first, which unit applies, how the origin is defined, and whether the value can be transformed. It should not imply that the example is a measured performance result.

Turn the dictionary into an acceptance question

Before integration, ask the supplier to confirm that the schema, fixtures and change notes are part of the delivered scope. Then have the application team test order, units, null handling, frame identity and timestamps against those fixtures. This is ordinary interface verification, not a field deployment procedure.

QUESTIONS FOR YOUR PROJECT

Buyer checklist for a localization coordinate dictionary

  • What named CRS, datum or engineering frame does each position field use, and is the identifier versioned?
  • What is the exact axis order, axis direction, dimensionality and unit for every coordinate value?
  • If altitude or height is supplied, what vertical reference, sign convention, unit and validity state apply?
  • Is the value geographic, projected, sensor-local or project-local, and is that distinction machine-readable?
  • How are valid, unavailable, unknown, stale, rejected and partially missing positions represented?
  • Which timestamps describe observation time, processing time and message receipt time?
  • Who performs any transformation into the customer's GIS CRS, and what assumptions must be preserved?
  • Can the manufacturer provide synthetic, de-identified examples for each state and identify semantic changes by interface version?

REFERENCES

Sources for this article

Publisher names, dates and relevant contributions are listed below. Confirm offered product details with the supplier.

Internet Engineering Task Force, RFC 7946 GeoJSON · 2016-08
Supports the distinction between longitude/latitude order, optional height, WGS 84 decimal-degree coordinates and null geometry for an unlocated feature.

Open Geospatial Consortium, OGC 12-063r5 Well-known text representation of coordinate reference systems · Accessed 2026-11-20
Supports documenting axis order, axis directions, axis units and compound horizontal/vertical coordinate reference systems explicitly.

New Ark, Acoustic core and a local-assembly path for microphone-array UAV detection PCBA · Accessed 2026-11-20
Supports describing array acquisition, algorithm processing and system interfaces as project-specific integration subjects rather than a universal public schema.

ARTICLE FAQ / 599

Questions on Acoustic drone localization system manufacturer: Asking for a Coordinate Dictionary, Not Just Coordinates

Practical questions about this article and the proposed product scope.

NEW ARK / ARC-PERIMETERFAQ
RECORD
ACOUSTIC DETECTION LIBRARY

TALK TO NEW ARK

Bring the coordinate dictionary into the integration review

If your project is reviewing an acoustic core, PCBA or system interface, send New Ark the fields your GIS application must consume. A project-scoped discussion can separate acoustic outputs, coordinate metadata, software revisions and customer-side transformation work without assuming a universal interface.

Discuss PCBA deliveryContact New Ark

Hong Kong New Ark Intelligent Technology Limited · Acoustic detection, partner integration and local-assembly discussions.

Back to newsroom